彩合网

DRUVATHERM®真空铲式干燥机

强烈混合防止在产品中的温度和湿度梯度 高的传热装置，更有效的干燥 温和热处理的产品在真空下 多相处理（混合，制粒，干燥，冷却） 经济型溶剂再生 机器类型 罗地格DRUVATHERM®铲式干燥机是batchprocess真空干燥机。由变频器，用铲子调节主轴，以达到优化调整的过程。特殊的混合元件旋转的筒状的鼓，它配备的加热/冷却夹套，并生成三维运动的产品（由机械产生的流化床）。与传热表面的颗粒得到的频繁接触时间干燥时间到米尼姆。

标准配置 的产品运动创建一个密集的个别产品颗粒接触的机器与被加热的壁，并在同一时间将产品尽量轻柔。旋转砍砸器，安装在滚筒内，提供额外的分散过程中可能出现的产品过渡阶段，是作为选装配置提供。中的溶剂蒸汽的细颗粒被收集，由气动清洁的过滤器安装在机器上，并返回到干燥的产品床。

应用范围 终点和中间的医药产品 化学制品 资源回收 不同类型的污泥 成型，摩擦和纤维的化合物 染料 塑料（纤维聚合物） 农用化学品 特种化学品

DRUVATHERM® Vacuum Shovel Dryer

Intensive mixing prevents temperature and moisture gradients in the product High heat transfer means more effective drying Gentle thermal treatment of the product under vacuum Multiphase process (mixing, granulating, drying, cooling) Economical solvent recuperation Machine Type Lödige DRUVATHERM® Shovel Dryers are batchprocess vacuum dryers. The main shaft with shovels is regulated by frequency converter to achieve an optimal adjustment to the process. The special mixing elements rotate in the cylindrical drum, which is equipped with a heating/cooling jacket, and generate a three dimensional movement of the product (mechanically generated fluid bed). The resultant frequent contact of particles with the heat transfer surface reduces the drying times to a minium.

Standard Configuration The product movement creates an intensive contact of individual product particles with the heated wall of the machine and at the same time treats the product as gently as possible. Rotating choppers, installed inside the drum, provide additional dispersion during possible product transition phases and are available as an option. Fine particles in the solvent vapours are collected by a pneumatically cleaned filter mounted on the machine and are returned to the product bed for drying.

Range of Application End and intermediate pharmaceutical products Chemicals Recyling Different types of sludge Moulding, friction and fibre compounds Dyestuffs Plastics (fibre polymers) Agrochemicals Chemical specialities